Astm D 751 docs

Searching:
Download
Astm D 751 - Fast Download

Download Astm D 751 from our fatest mirror

ITEM D-751 MANHOLES, CATCH BASINS, INLETS AND...

3771 dl's @ 5294 KB/s

doc
ITEM D-751 MANHOLES, CATCH BASINS, INLETS AND...

ITEM D-751 MANHOLES, CATCH BASINS, INLETS AND INSPECTION HOLES. DESCRIPTION. 751. ... The sand shall conform to the requirements of ASTM C 144. 751-2.3 CONCRETE.

http://www.portofportland.com/Library/Eng_Specs_Gdlines/D-751.docx

Date added: August 20, 2016 - Views: 2

doc
ITEM D-751 MANHOLES, CATCH BASINS, INLETS AND...

DESCRIPTION. 751 1.1 This item shall consist of construction of manholes, catch basins, inlets, and inspection holes, in accordance with these specifications, at the ...

http://bids.probldgsystems.com/Jones%20Airways/Shared%20Documents/Project%20Drawings%20and%20Specifications/Specs/0%20Project%20Manual/33%20D%20751%20Manholes,Inlets,Insp.Holes.doc

Date added: October 1, 2016 - Views: 1

doc
CABLEGUARD™ ELASTOMERIC WRAP - The D.S. Brown...

The material covered by this specification shall be an elastomeric cable wrap that meets the ... (ASTM D-751) 120% minimum Tear Propagation (ASTM D-751 tongue ...

http://www.dsbrown.com/Resources/Bridges/cableguard/CableguardSpecWeb.doc

Date added: August 21, 2016 - Views: 1

doc
part 2b specs - FAACO

Puncture Strength (ASTM D 751) Min. 50 lbs. 4. Mullen Burst Strength (ASTM D 751) Min. 100 psi. Packaging and Identification Requirements ... part 2b specs ...

http://faaco.faa.gov/attachments/0700346_specs_24.doc

Date added: August 21, 2016 - Views: 1

doc
Construction Specification 51—Corrugated Metal...

Zinc dust - zinc oxide primer, ASTM D 79 and D 520. b. ... NRCS - 751-1. AL - EWP - Title: Construction Specification 51—Corrugated Metal Pipe Author: npss

https://efotg.nrcs.usda.gov/references/public/al/751.doc

Date added: August 21, 2016 - Views: 1

doc
SECTION 07525 - gaf.com

American Society for Testing and Materials (ASTM) - Annual Book of ASTM Standards. ASTM D-751 – Standard Test Methods for Coated Fabrics . ASTM D-2137 ...

http://www.gaf.com/Warranties_Technical_Documents/Low_Slope_CSI_Specifications/Single_Ply_TPO_Adhered_Systems/T_FA_T_N_80_80FB.doc

Date added: October 1, 2016 - Views: 1

doc
NATURAL RESOURCES CONSERVATION SERVICE - USDA

Natural resources conservation service conservation practice sPECIFICATION. 428B - Irrigation Water Conveyance . ... 8 8 ASTM-D-751 (tongue) Hydrostatic burst ...

https://efotg.sc.egov.usda.gov/references/public/CO/CO428B_spec.doc

Date added: August 21, 2016 - Views: 1

doc
072500 - Weather Barriers

ASTM International. ASTM D 751; Standard Test Methods for Coated Fabrics. ASTM D 4533; Standard Test Method for Trapezoid Tearing Strength of Geotextiles.

http://www.dupont.com/content/dam/assets/products-and-services/construction-materials/assets/Architectural%20Binder/DuPont%E2%84%A2%20RoofLiner%20Product%20and%20System%20Specifications.doc

Date added: August 28, 2016 - Views: 1

doc
SECTION 07535 - New York

Tear Strength: 90 lb min, ASTM D 751 (tongue tear). 5. ... END OF SECTION. D&C JWM:dja. Updated 02/08/2008. Printed 04/16/2015 075002 - 1 Project No. Title:

https://online.ogs.ny.gov/dnc/masterspec04/docs/Division07ThermalAndMoistureProtection/075002MechanicallyAttachedHypalonRoofingSystem.doc

Date added: August 21, 2016 - Views: 1

doc
DETAILED SPECIFICATIONS FOR - Engineered Textile...

The material supplied under these specifications shall be a first quality product designed and manufactured specifically for this ... ASTM D-751. Method A Procedure 1 ...

http://www.etpinfo.com/UPDATES/FLOATING%20BAFFLE%20SPECIFICATIONS.doc

Date added: August 21, 2016 - Views: 1

doc
SECTION 07533 - Chrysler

Manufacturer to guarantee the membrane thickness meets or exceeds the specified thickness when tested according to ASTM D-751.

https://gsp.extra.chrysler.com/mfg/amedd/aamebldg/specs_revised/2014Specs/075419%20POLYVINYL-CHLORIDE%20(PVC)%20ROOFING.doc

Date added: September 7, 2016 - Views: 1

doc
Revised: July 10, 1998 - Yemm & Hart Home Page

ASTM D 751 Standard Test Method for Elongation. 4. ASTM D 751 Standard Test Method for Tear Strength. 5. ASTM D 2047 Standard Test Method for Coefficient of Friction. 6.

http://www.yemmhart.com/materials/flexisurf/pdf_flexisurf/flexisurfspecifications.docx

Date added: August 21, 2016 - Views: 1

doc
www.systemcomponents.net

ASTM D 751: Standard Test Methods for Coated Fabrics. ASTM D 5261: Standard Test Method for Measuring Mass per Unit Area of Geotextiles. ASTM D 1117: Standard Guide ...

http://www.systemcomponents.net/techlibrary/coverpro_3000_guide_specification.doc

Date added: August 21, 2016 - Views: 1

doc
SECTION - Engineered Textile Products, Inc.

Breaking Strength, lbf ASTM D 751 250 (grab tensile at strain rate Grab Method A. of 12 in./min.) Elongation at break of fabric, % ASTM D 751 25 typical.

http://www.etpinfo.com/channelmaster/Specifications-Steel-Tanks-PPE.doc

Date added: August 21, 2016 - Views: 1

doc
SECTION 07525 - cityofpowdersprings.org

American Society for Testing and Materials (ASTM) - Annual Book of ASTM Standards. ASTM D-751 – Standard Test Methods for Coated Fabrics . ASTM D-2137 ...

http://www.cityofpowdersprings.org/DocumentView.aspx?DID=1099

Date added: October 1, 2016 - Views: 1

doc
www.sealtightsolutions.com

ASTM D-2103. ASTM D-751. ASTM C1224/236. ASTM D-882. ASTM E-84. ASTM E-84. STD-810 D. ASTM E-96. Foil/White. 60 mil. 53 Lbs. 5.0 Aluminum Foil. Closed Cell Urethan ...

http://www.sealtightsolutions.com/pdf/STSPROPLUSdatasheet.doc

Date added: October 1, 2016 - Views: 1

doc
SECTION 329500 - VEGETATED ROOF ASSEMBLIES

ASTM D 751 Standard Test Method for Coated Fabrics. ASTM D 7004 Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes. PREINSTALLATION MEETINGS.

https://www.tremcosealants.com/fileshare/specs/07%2013%2026%2002%20SELF-ADHERING%20SHEET%20WATERPROOFING.doc

Date added: October 1, 2016 - Views: 1

doc
SECTION 07552 - SBS-MODIFIED BITUMINOUS MEMBRANE...

ASTM D 751 – Grab Method 200 (35) 305 Elongation at Break (Cross Direction) % ASTM D 751 – Grab Method 15 29.5 Seam Strength, min.

http://facilities.mysdhc.org/PandC/standards/07_54_16%20HCPS%20Roofing%20System%205.doc

Date added: August 18, 2016 - Views: 1

doc
Metric-SI] - General Services Administration

Follow ASTM D 2091 test procedure at 230 degrees C ... Test Method Breaking Strength ASTM D 751 ... [Metric-SI] Author: Your Name Here

http://www.gsa.gov/graphics/fas/96-572B_R2HT2-r_0Z5RDZ-i34K-pR.doc

Date added: September 1, 2016 - Views: 1

doc
www.buildsite.com

ASTM D 751 Test Method for Coated Fabrics. ASTM D 570 Test Method for Water Absorption of Plastics . UL 790 Tests for Fire Resistance of Roof Covering Materials.

http://www.buildsite.com/pdf/carlislecoatings/CCW-MiraDRI-860861-Guide-Specifications-B23706.doc

Date added: August 21, 2016 - Views: 1

doc
CSI Division 7 Specification - Sweets

CSI Division 7 Guide Specifications ... N/A Dynamic D 5635 25 Joules 25 Joules Elongation at Reinforcement Break ASTM D-751 MD 34.29% 42.41% 15% XMD 33 ...

http://sweets.construction.com/swts_content_files/2414/389315.doc

Date added: August 21, 2016 - Views: 2

doc
Division 7 - Custom Seal

Tearing Strength, ASTM D-751 245N (55lbf.), Min. Min. Properties After. Heat Aging ASTM D-751 a. Breaking Strength Per 90% . b. Tear Strength ASTM D-3045 90%.

http://www.customseal.com/PDF/CUSTOMspecTPO.doc

Date added: August 21, 2016 - Views: 1

doc
systemcomponents.net

ASTM D 751: Standard Test Methods for Coated Fabrics. ASTM D 5261: Standard Test Method for Measuring Mass per Unit Area of Geotextiles. ASTM D 1117: Standard Guide ...

http://systemcomponents.net/techlibrary/coverpro_guide_specification.doc

Date added: August 21, 2016 - Views: 1

doc
Irrigation Water Conveyance (ft) - USDA

Irrigation Water Conveyance. Ditch and Canal Lining, Flexible Membrane (Ft.) Code 428B definition. A fixed lining of impervious material installed in an existing or ...

https://efotg.sc.egov.usda.gov/references/Agency/ID/428B-CanalLiningMembrane-Feb03.doc

Date added: August 21, 2016 - Views: 1

doc
Part 9 of AC 150/5370-10G Standards for Specifying...

Item D-751 Manholes, ... ASTM A760Standard Specification for Corrugated Steel Pipe, ... Part 9 of AC 150/5370-10G Standards for Specifying Construction Of Airports, ...

http://www.faa.gov/airports/engineering/construction_standards/media/AC-150-5370-10G-part-9.docx

Date added: August 20, 2016 - Views: 2

doc
SPECIFIER NOTE: THE FOLLOWING SPECIFICATION MAY BE...

The following specification outlines the requirements for a ... 70 mils - Tensile strength @ break 120 lb/in ASTM D-751 Elongation 50% ASTM D-751 Tearing ...

http://www.derbigumenergies.us/toolbox/ContentDir/Certifications_US_file_19.doc

Date added: August 18, 2016 - Views: 1

doc
Division 7 - Custom Seal

Tear Strength, (lbs) ASTM D 751 200 x 45 lbs 400 x 90 lbs. Tensile Strength (psi) ASTM D-751 35 x 200 psi 50.8 x 290 psi. Breaking Strength (%) ASTM D-3045 ...

http://www.customseal.com/PDF/CUSTOMspecPVC.doc

Date added: August 21, 2016 - Views: 1

doc
Multi-Flow drainage system by Varicore...

Pond Liner Venting and Drainage System. MODEL SPECIFICATION . 1.0 DESCRIPTION . ... lb ASTM D-751 50 Mullen Burst, psi ASTM D-3786 200 Trapezoidal Tear, ...

http://easypropondproducts.com/media/pdfs/MultiVentSpecification2010.doc

Date added: August 21, 2016 - Views: 1

doc
DIVISION 100 - Department of Transportation

... ASTM D 751 1.24 to 1.26 mm (d) Density, ASTM D 792 0.941 to 0.960 g/cm3 (e) ... 6.35 6.35 6.35 ASTM D 6525 Minimum permissible shear stress(4) (pascals) ...

https://flh.fhwa.dot.gov/resources/specs/fp-03/fp-03met-div700.doc

Date added: August 19, 2016 - Views: 3

doc
neh642cont - NRCS

peel strength, lb/in*** ASTM D 751 ASTM D 413 35. 14 *All values, unless specified otherwise, are minimum average roll values as reported for the test method.

http://www.nrcs.usda.gov/Internet/FSE_DOCUMENTS/nrcs141p2_036681.doc

Date added: August 18, 2016 - Views: 1

doc
MASTERSPEC - ePro Serv

... Aging ASTM G 23 No Effect Moisture Vapor Transmission ASTM E 96 0.088 g/sq. ft. /hr. Hydrostatic Water Pressure ASTM D 751 26 psi Perm Rating (US PERMS) ASTM ...

http://www.eproserv.com/download.php?key=20ebefd49b34715f8f639e0523a1b24a3

Date added: August 21, 2016 - Views: 1

doc
MASTERSPEC - ePro Serv

... ASTM G 23 No Effect Moisture Vapor Transmission ASTM E 96 .071 g/sq. ft. /hr. Hydrostatic Water Pressure ASTM D 751 28 psi Perm rating (US Perms) ASTM E 96 ...

http://www.eproserv.com/download.php?key=2be9ac233c7f3b0a09d53076a228b436b

Date added: August 21, 2016 - Views: 1

doc
www.blanket-insulation.com

ASTM D 751-95 Standard Test Methods for Coated Fabrics. Vinyl Coated Polyester Composite with Continuous Service Temperatures of 250˚F (121˚C) ...

http://www.blanket-insulation.com/PDF2014/MSWord2011/LT250A-VP-METALDRINGVELCRO%20TAB.doc

Date added: October 1, 2016 - Views: 1

doc
CSI Division 7 Specification -...

335.73 lbf, (1.5 kN) 220 lbf, (0.98 kN) (Grab Method) XMD Tear Strength ASTM D-751 Procedure B, (8”x8” sample) MD 77.6 lbf. (0.35 kN), 163 lbf. (0.73 ...

http://sweets.construction.com/swts_content_files/2414/389311.doc

Date added: September 28, 2016 - Views: 1

doc
randallmfg.com

ASTM D 751-89 sec. 10.2. 13. 18. Tongue Tear, lbs. Warp. Fill. FS 5134 / ASTM D2261. 90. 100. 95. 110. Strip Tensile, lbs. Warp. Fill. FS 5102 / ASTM D5035. 240. 185 ...

http://randallmfg.com/warehouse/wp-content/uploads/2012/10/Industrial-Curtains-Spec-Sheet.docx

Date added: August 21, 2016 - Views: 1

doc
SECTION 03130 - Quad-Lock Insulating Concrete...

ASTM D 751-00 – Standard Test Methods for Coated Fabrics. CAN/CGSB-51.34-M86 – Vapour Barrier, Polyethylene Sheet for Use in Building Construction.

http://www.fab-form.com/fastfoot/fastfootFiles/FastfootCsiSpecification.doc

Date added: August 21, 2016 - Views: 1

doc
INVITATION TO BID - govbids.com

Hydrostatic Resistance, psi, min. ASTM D 751 85. Factory Seam Requirements. Bonded Seam Strength ASTM D 3083 (factory seam, breaking factor, Modified ppi width)

http://www.govbids.com/storeddoc2/RockyMountain/Documents/Bid/105048_0_1.DOC

Date added: September 3, 2016 - Views: 1

doc
DIVISION 100 - Department of Transportation

... ASTM D 751 48.8 to 49.6 mils (d) Density, ASTM D 792 0.549 to 0.555 ounces per cubic inch (e) ... ASTM D 522, using the 1/4-inch No cracking or flaking.

https://flh.fhwa.dot.gov/resources/specs/fp-03/fp-03usc-div700.doc

Date added: August 20, 2016 - Views: 3

doc
SECTION ZZZZ - Raven Engineered Films

SECTION ZZZZ. REINFORCED LANDFILL COVER. Reinforced Landfill Cover (RLC): The Reinforced Landfill Cover serves to minimize the infiltration of ... D. CONSTRUCTION ...

http://ravenefd.com/index.php/download_file/view/308/

Date added: September 3, 2016 - Views: 1

doc
www.arcat.com

ASTM D 751 - Standard Test Methods for Coated Fabrics; 2000. ASTM D 1434 - Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and ...

http://www.arcat.com/sdspecs/docx04/07_14_00epr.docx

Date added: August 21, 2016 - Views: 1

doc
2011 Specifications - Kentucky Department of...

2011 . Kentucky Department of Education. Office of District Support Services. TABLE OF CONTENTS. PAGE ... (10) pounds of adhesion, when tested per ASTM D-751-79.

http://education.ky.gov/districts/trans/Documents/2011SpecsFinal.doc

Date added: August 18, 2016 - Views: 5

doc
www.arcat.com

ASTM D 751 - Standard Test Methods for Coated Fabrics. ASTM D 828 - Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of ...

http://www.arcat.com/sdspecs/docx04/07_54_19dlr.docx

Date added: August 21, 2016 - Views: 1

doc
1 - Construction Products, Equipment & Decorative...

Hydrostatic resistance: Passed (ASTM D-751) Elongation: 1050 % Solids content: 68 % Tensile strength: 68 psi Re-coat time: 12-36 hours ...

http://www.parchem.com.au/public/pdfs/data-sheets/EmerProof-EcoFlex-SC.doc

Date added: October 1, 2016 - Views: 1

doc
SECTION ZZZZ - Raven Engineered Films

SECTION ZZZZ. REINFORCED LANDFILL ... D. CONSTRUCTION. 1. Shipping, Handling, and Storage: The RLC shall be shipped, handled, and stored in strict accordance with the ...

http://ravenefd.com/index.php/download_file/view/310/167/

Date added: October 1, 2016 - Views: 1

doc
Spec Data Sheet – AVM System 700 Rev

... ASTM D-751 (1989) PASS PASS PASS PASS Breaking Strength - ASTM D-752 ... Spec Data Sheet – AVM System 700 Rev. 10/2008 AVM Document # 30700. Title:

http://www.avmindustries.com/wp-content/uploads/specs/doc/0700-Spec-Sheet-AVM-System-700-Tile%20Waterproofing.doc

Date added: August 21, 2016 - Views: 1

doc
ciagent.com

Grab Break ASTM D-751 550 500 lbs; Strip Break ASTM D-751. ProcB 425 x390 lbs/in.; Tongue Tear ASTM D-751 110 x 110 lbs.; Trap Tear ASTM D-4533 70 X 55 lbs.; ...

http://ciagent.com/ciagent/engineer-specs/Engineer-Specs-For-Geomembrane-Liner-System.docx

Date added: September 7, 2016 - Views: 1

doc
1 - floodcontrol.co.riverside.ca.us

D Runoff Coefficients for ... Elevated oil and grease content can ... Property Test Reference Minimum Specification Grab Strength ASTM D4632 90 lbs Elongation at peak ...

http://www.floodcontrol.co.riverside.ca.us/downloads/NPDES/DAMP%20App-O_WQMP%202008-11-06.doc

Date added: August 18, 2016 - Views: 3

doc
FIRE PROTECTION SPECIFICATION - Victaulic

ASTM D-2000 – Standard Specification System for Rubber Products in Automotive Applications. ... Victaulic FireLock® Series 751. a. Optional Accessories:

http://static.victaulic.com/assets/uploads/documents/Services%20/Victaulic%20FP%20Spec.doc

Date added: August 18, 2016 - Views: 3

doc
Geomembrane Pond Liner - Layfield Group

ASTM D4759 – Standard Practice for Determining the Specification Conformance of Geosynthetics ASTM D4833 – Standard Test Method for Index Puncture Resistance of ...

https://www.layfieldgroup.com/content_files/files/FullSpecs/3347161304_BioGasCover.doc

Date added: August 21, 2016 - Views: 1